Plastic drinking bowls

Plastic drinking bowls

Plastic drinking bowls are made of high-quality ultraviolet-resistant polyethylene. They operate on the principle of thermos thanks to double isolated walls. Water delivery is carried out by plumbing, built under soil frost level. Additional frost resistance is achieved by installing heating element into drinking bowl.
Individual automatic drinking bowls for cattle are used for cattle watering when the animals are tethered. Watering bowl is fixed on upright frame between two adjacent stalls in order to water two cows standing one near other and is connected by lifting pipe to plumbing. Valve mechanism provides water tightness in assembled watering bowls during overpressure of water in plumbing.   

Watering bowl «Warm spring»

One watering bowl for 40 animals.

Capacity 75 l.

During subzero temperature it is recommended to be used for 20 animals.

 

 

 

 

ArticleNameQuantity
130.0640  Watering bowl «Warm spring» Model 640 1
Additional equipment
131.6070  Heating coil for Model 630/640, 24 V, 180 W 1
101.0390  Transformer 230/24 V, 200 W 1
101.0392  Transformer 230/24 V, 400 w 1
101.0389  Thermostat 1

Thermo watering bowl with heating 2,3m

Length 2,3 m.

Capacity 160 l.

Watering bowl is equipped with float valve which provides high water supply rate – up to 40 l per minute.


 

 

 

ArticleNameQuantity
130.6523  Thermo watering bowl with heating Model 6523, 2,3 m 1
131.0700  Float valve MAXIFLOW, Model 700 1
Additional equipment
131.0738  Floating valve MAXIFLOW for low pressure, Model 738 1
131.6069  Heating coil Model 6069, 24 V, 180 W 1
101.0390  Transformer 230/24 V, 200 W 1
101.0392  Transformer 230/24 V, 400 w 1
101.0861  Thermo cord, 24 V, 20 W, 2 m 1
101.0389  Thermostat 1

There is possibility to assemble up to three additional float valves of high or low pressure.

Detachable cap provides easy access to float valves for their adjustment and cleaning.

Watering bowl frost resistance up to -10°C is provided by double walls and thermal insulation. If heating coil is installed, frost resistance in valve area will reach up to -30°C!